I did. there was 1 error....a radius if I remember correctly....but I don't remember which one.
Here is a partial view from one of my CAD drawings.
Attachment:
Lower Support Tray 1.JPG [ 78.34 KiB | Viewed 15266 times ]
| Bugattibuilder.com forum http://www.bugattibuilder.com/forum/ |
|
| Chassis drawings http://www.bugattibuilder.com/forum/viewtopic.php?f=1&t=2469 |
Page 1 of 3 |
| Author: | Udolahr [ Tue Jun 28, 2011 11:58 am ] |
| Post subject: | Chassis drawings |
has anyone ever checked the chassis drawings for example t35 and t41 with a cad programm ? |
|
| Author: | Herman [ Tue Jun 28, 2011 12:16 pm ] |
| Post subject: | Re: Chassis drawings |
There was a discussion some time ago, on the drawings of the T35, where the Brits changed some dimensions to make the drawings unsuitable for production. I never entered the data in CAD, so personally I do not know. Stuart Brown entered the complete T35 into cad (3D) so if there were errors, he must have found them. (he found very little) See: viewtopic.php?f=1&t=420 Gerald Wingrove did the same for the T41 (in 2D) but these were drawings from his own observations, so most likely are not 100% correct. |
|
| Author: | Udolahr [ Tue Jun 28, 2011 1:22 pm ] |
| Post subject: | Re: Chassis drawings |
I do not belive the story that the brits did change some dimensions to make the drawings unsuitable for production. Look , how many dimensions must I change to stop production of this part ? They made drawings with mistakes , after over 20 years driving Jaguars , I know this mistakes are not done on purpose . The Molsheim drawings have mistakes , in the t35 and t41 , the radiuses do not fit together . |
|
| Author: | Greg Morgan [ Thu Jun 30, 2011 2:01 pm ] |
| Post subject: | Re: Chassis drawings |
What radius is different on the type 41? |
|
| Author: | Udolahr [ Thu Jun 30, 2011 6:01 pm ] |
| Post subject: | Re: Chassis drawings |
in the drawing 41ch216 radius at the rear end is 60mm ? |
|
| Author: | nicefloor [ Fri Jul 01, 2011 5:00 am ] |
| Post subject: | Re: Chassis drawings |
I did. there was 1 error....a radius if I remember correctly....but I don't remember which one. Here is a partial view from one of my CAD drawings. Attachment: Lower Support Tray 1.JPG [ 78.34 KiB | Viewed 15266 times ] |
|
| Author: | Greg Morgan [ Sat Jul 02, 2011 9:07 am ] |
| Post subject: | Re: Chassis drawings |
in the drawing 41ch216 radius at the rear end is 60mm ? So what's the problem with the radius being 60mm - its just a fillet, it doesn't fit into anything. |
|
| Author: | Udolahr [ Sun Jul 03, 2011 2:11 pm ] |
| Post subject: | Re: Chassis drawings |
If you think so . If I build a Bugatti part , it has to be like the original and not fantasy . If I do not care about it , I can change any dimension . It looks like the drawing 41ch216 is full of mistakes .Is there any other t41 drawing for the chassis ? maybe Bugatti did not use 41ch216 . |
|
| Author: | Greg Morgan [ Mon Jul 04, 2011 8:23 am ] |
| Post subject: | Re: Chassis drawings |
Udo - What are you on about this time? |
|
| Author: | Udolahr [ Mon Jul 04, 2011 12:31 pm ] |
| Post subject: | Re: Chassis drawings |
If you take the chassis drawing 41ch216 and look at original chassis fotos , suddenly there are some questions . |
|
| Author: | J.J.Horst [ Mon Jul 04, 2011 12:33 pm ] |
| Post subject: | Re: Chassis drawings |
Maybe you can make a scan of the drawing, as well as posting a photo of the actual chassis? That way also those few of us who do not have access to 41CH216 can see what this is about? |
|
| Author: | Udolahr [ Mon Jul 04, 2011 1:09 pm ] |
| Post subject: | Re: Chassis drawings |
I will look , if I can show a cad drawing , have to change the file to something . |
|
| Author: | Herman [ Mon Jul 04, 2011 1:20 pm ] |
| Post subject: | Re: Chassis drawings |
you can send it to me, i will make it available (herman at bugattibuilder dot com) |
|
| Author: | Udolahr [ Mon Jul 04, 2011 1:28 pm ] |
| Post subject: | Re: Chassis drawings |
dwg or dxf ? |
|
| Author: | Herman [ Mon Jul 04, 2011 3:26 pm ] | ||
| Post subject: | Re: Chassis drawings | ||
voila
|
|||
| Page 1 of 3 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|