| Bugattibuilder.com forum http://www.bugattibuilder.com/forum/ |
|
| adjusting t35 carburettors http://www.bugattibuilder.com/forum/viewtopic.php?f=1&t=3890 |
Page 1 of 1 |
| Author: | davids [ Tue Mar 06, 2012 6:34 pm ] |
| Post subject: | adjusting t35 carburettors |
I have tried the search for this but nothing came up... What adjustment is there for the barrel-boisseau carbs for rich/weak ness and float level for example. thanks |
|
| Author: | Johnl [ Sat Mar 10, 2012 11:55 am ] |
| Post subject: | Re: adjusting t35 carburettors |
You change the jets, for the type 35 with twin Solex barrel-throttle carbs you need .45 idle jets, 130 main with the air bleed holes .95mm dia, 5mm from the top of the jet. this is important to get smooth pick-up from low revs. Float level should be about 2 - 3 mm below the top of the jet. Check by mounting the float chamber/jet holder with the jets outside the choke tube so you can see the fuel level. Choke tubes 26mm. could send a drawing of the jet if you give me your address. john Sorry, should have said .135 main jets. Hope you got my email with more explanation. j |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|