Whats wrong with this picture?

37quest · **Joined:** Mon Oct 19, 2009 6:28 pm **Posts:** 180

OK as herman in his last post has asked for more technical info can anyone tell me what’s wrong with this picture?
Anyone but bugwrench or Lazarus (who will see immediately) who answers correctly may win a prize ;-)

Marek · **Joined:** Wed Feb 13, 2008 5:47 pm **Posts:** 131

Hello!
Please stop kidding. Herman's post has a wider context. It will be difficult to put this elements to the right place. More interesting is how to make them machine od cast?

Marek

Udolahr · **Posted:** Fri Jun 29, 2012 8:08 pm

and next time you better use a proper tube bending machine .

37quest · **Joined:** Mon Oct 19, 2009 6:28 pm **Posts:** 180

Neither of you are close yet do you need a clue?

Marek · **Joined:** Wed Feb 13, 2008 5:47 pm **Posts:** 131

Neither of you are close yet do you need a clue?

Yes, learning by playing. I'm all ears.

37quest · **Joined:** Mon Oct 19, 2009 6:28 pm **Posts:** 180

They are someone's idea of the start of a gearbox x member so what's wrong?

Marek · **Joined:** Wed Feb 13, 2008 5:47 pm **Posts:** 131

Udo it seems like Bo is coping you, did he bought a license? Current temp outside is 22,5 degrees Celsius.

Udolahr · **Posted:** Sat Jun 30, 2012 12:21 am

is the answer , that someone is building gearbox crossmember ? Everybody can see this . I thought you come up with something much more difficult .
I did not sell any licence , should I ?
we have 32 celsius

Bugwrench · **Joined:** Mon Jan 07, 2008 6:16 pm **Posts:** 338

Hello 37quest,
They still have no clue! Ha, ha! BTW, there is more than one error but that is only obvious for the real specialists! You know these guys that do not want to share their knowledge!
Bugwrench

Udolahr · **Posted:** Sun Jul 01, 2012 1:22 pm

I would not call it technically , if some old guys get completely excited about 2 rusty pipes .

37quest · **Joined:** Mon Oct 19, 2009 6:28 pm **Posts:** 180

Come on boys play nicely ,I can see the best vintage aero engineer in Germany and the Best fabricator in Poland need some help here’s a clue.
Now what’s wrong with the first photo?;-)

Greg Morgan · **Joined:** Wed Aug 13, 2008 12:10 am **Posts:** 334

I think you should put them out of their misery. Then we can get back to Udo's questions.

Marek · **Joined:** Wed Feb 13, 2008 5:47 pm **Posts:** 131

If you read post more accurately you will save our time and disappointment. I think that with your post you do not fit to Herman's question. In what you are better than me or Udo? I deserve to be rewarded from you but I can say that you insult me. Do me a favor and before you write anything think about it twice.
Marek

37quest · **Joined:** Mon Oct 19, 2009 6:28 pm **Posts:** 180

Merik I don't think I'm better than anyone infact my skills are extremely limited. I apologise if you feel insulted.
perhaps my humour failed to pass the language barrier. The post was simply to make people think A little about how the factory actually made parts rather than what the drawings seem to show im sorry you seem to have missed the point.
I was trying to show the importance of context, if you look at the second photo more closely you will see that the pre bent tubes are not usable as the lugs will not fit past the bend they need to be in place before the tubes are bent. The only solution to make the tubes in the first photo useable would be to cut and rejoin the tube(not ideal) And naturally not something the factory did.

Marek · **Joined:** Wed Feb 13, 2008 5:47 pm **Posts:** 131

"It will be difficult to put this elements to the right place. More interesting is how to make them machine od cast?"

Bo, do you have a knowledge about the topic "Parts" about arms? Would be nice.
Marek

Whats wrong with this picture?

Who is online