a nice T59 replica :
vince
| Bugattibuilder.com forum http://www.bugattibuilder.com/forum/ |
|
| type 59 http://www.bugattibuilder.com/forum/viewtopic.php?f=1&t=4452 |
Page 1 of 2 |
| Author: | vince [ Mon Oct 21, 2013 11:19 am ] |
| Post subject: | type 59 |
a nice T59 replica : vince |
|
| Author: | sjordan47 [ Fri Oct 25, 2013 5:37 pm ] |
| Post subject: | Re: type 59 |
They did a nice job. On a similar subject, I have a 1/32 Matchbox kit of the T59. It has a separate part for the tail section, and I can't find reference for the Bugatti that had this. Does anyone know a chassis numbr? |
|
| Author: | Uwe [ Sat Oct 26, 2013 4:38 am ] |
| Post subject: | Re: type 59 |
could be BC159 |
|
| Author: | vince [ Sat Oct 26, 2013 6:58 pm ] |
| Post subject: | Re: type 59 |
Yes, it's BC159 |
|
| Author: | Uwe [ Sun Oct 27, 2013 1:42 pm ] |
| Post subject: | Re: type 59 |
|
|
| Author: | Udolahr [ Sun Oct 27, 2013 3:05 pm ] |
| Post subject: | Re: type 59 |
Nice wheels . Anybody has a close up foto from this wheel's ? What kind of car is in the back ? |
|
| Author: | barttore [ Sun Oct 27, 2013 4:35 pm ] |
| Post subject: | Re: type 59 |
57248 is the Yellow/black car (I gues you recognise the Golf and Mercedes yourself  )
|
|
| Author: | Udolahr [ Sun Oct 27, 2013 8:40 pm ] |
| Post subject: | Re: type 59 |
is it a T59 ? |
|
| Author: | Uwe [ Mon Oct 28, 2013 6:41 am ] |
| Post subject: | Re: type 59 |
59/57S |
|
| Author: | vince [ Mon Oct 28, 2013 7:14 am ] |
| Post subject: | Re: type 59 |
Udolahr wrote: Nice wheels . Anybody has a close up foto from this wheel's ? What kind of car is in the back ? like that ? 
|
|
| Author: | Udolahr [ Mon Oct 28, 2013 4:32 pm ] | ||
| Post subject: | Re: type 59 | ||
Yes , very nice . Can I see tooth between the rim and the center part ? Same tooth like the hub has , just bigger ?
|
|||
| Author: | vince [ Mon Oct 28, 2013 6:57 pm ] |
| Post subject: | Re: type 59 |
Yes, it's teeth. but I can't tell you more ! 
|
|
| Author: | Udolahr [ Wed Oct 30, 2013 1:50 pm ] |
| Post subject: | Re: type 59 |
was the 59 wheel successful , or was it a troublemaker ? |
|
| Author: | Lazarus [ Wed Oct 30, 2013 10:17 pm ] |
| Post subject: | Re: type 59 |
Udolahr wrote: was the 59 wheel successful , or was it a troublemaker ? The idea seems to have been to take the driving load off the spokes and transfer it directly from the drum to the wheelrim.I would imagine that it worked well enough.Every T59 still uses this system and I have never heard of anyone fitting different wheels because of a problem.They could apparently develop slight wear between the drums and the rims and "click "on takeoff but this happens with ordinary wirewheels and hubs as well. |
|
| Author: | davids [ Thu Oct 31, 2013 8:21 am ] |
| Post subject: | Re: type 59 |
fascinating design..is there a photo of the hub and rim separate ? with such surface area I would think a "click" would take longer to wear in compared with standard wire or alloy wheel acting on steel splines direct in the smaller hub.... |
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|