| Bugattibuilder.com forum http://www.bugattibuilder.com/forum/ |
|
| Adding depth to engine parts http://www.bugattibuilder.com/forum/viewtopic.php?f=7&t=69 |
Page 1 of 1 |
| Author: | Herman [ Fri Mar 03, 2006 12:14 pm ] |
| Post subject: | Adding depth to engine parts |
To add a certain depth to engine parts, finish them in the paint of your choice. (mostly steel or aluminium). After that, apply very thinned down dark brown paint (Tamiya Smoke, 1 part paint, 10 parts alcohol) and with a large brush, let it run into corners and crevices (or apply all over). Then clean with a dry piece of cloth. You can do that several times to add more dirt. Then drybrush with a very dry brush a bit of silver over the top parts and ridges. Let dry and enjoy. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|